Jetwaty JIMB-1900-2L Intel Celeron J1900, 12x Serial ports, Built in +12V DC Power Jack,
Model #: JIMB-1900-2LItem #: XJIMB-1900-2L
x
Special Order
These items are not immediately available for pickup at our stores.
We can ship these products to our stores for free in-store pickup.
Items usually arrive at the store within 2 to 7 business days.
Share:
E-Mail To A Friend:Jetwaty JIMB-1900-2L Intel Celeron J1900, 12x Serial ports, Built in +12V DC Power Jack,
E-mail this product information to:
Add your own personal message:
Enter your email address:
Note: Your email address is used only to let the recipient know who sent the email and in case of transmission error. Neither your address nor the recipient's address will be used for any other purpose.
Your message has been successfully sent.
Please fill-up the form properly.
Jetwaty JIMB-1900-2L Intel Celeron J1900, 12x Serial ports, Built in +12V DC Power Jack,
Fanless Intel® Celeron J1900, 2.0GHz Quad-Core SoC, 10W, Bay Trail
Memory
1 * 204-pin SO-DIMM slot supporting DDR3L-1333 up to 8GB total, 1.35V required
Graphics
Intel HD Graphics
Audio
Realtek ALC662 HD Audio
LAN
2 x Realtek RTL8111G Gigabit LAN
1 x Realtek RTL8111G Gigabit LAN
Storage
1 x SATA2 3Gb/s Connector 1 x M.2 SATA 2242/2260
Super IO
FINTEK F81866A
Back Panel Connectors
External IO
1 +12V 2.5mm Diameter DC-In Power Jack 1 VGA (2560x1600 @ 60Hz) 1 USB 3.0 3 USB 2.0 2 RJ45 LAN (10/100/1000) 2 3.5mm Audio
1 +12V 2.5mm Diameter DC-In Power Jack 1 VGA (2560x1600 @ 60Hz) 1 USB 3.0 5 USB 2.0 1 RJ45 LAN (10/100/1000) 2 3.5mm Audio
Onboard I/O Connectors
Internal IO
1 SATA2 3Gb/s Connector 1 M.2 SATA 2242/2260 1 Mini-PCI Express slot (Full-size) 12 Serial port headers (10 * RS232, 2 * RS232/422/485/TTL) 3 USB Pin Header for up to 6 additional USB 2.0 Ports 1 24-bit Dual Channel LVDS Connector/Inverter 1 SIM Card Socket 1 AT/ATX Mode Jumper 1 20-pin HDMI Header (1920x1200 @ 60Hz) 1 12-pin VGA Header (2560x1600 @ 60Hz) 1 4-pin 3W Stereo Amplifier header (Left+Right) 1 10-pin GPIO Header 1 25-pin Parallel Header 1 6-pin PS/2 Mouse/Keyboard Header 1 4-pin Fan Header 1 4-pin SATA Power Output (Male) 1 4-pin +12V Alternate Power Connector
1 SATA2 3Gb/s Connector 1 M.2 SATA 2242/2260 1 Mini-PCI Express slot (Full-size) 6 Serial port headers (6 * RS232) 2 USB Pin Header for up to 4 additional USB 2.0 Ports 1 30-pin eDP Header 1 SIM Card Socket 1 AT/ATX Mode Jumper 1 20-pin HDMI Header (1920x1200 @ 60Hz) 1 12-pin VGA Header (2560x1600 @ 60Hz) 1 4-pin 3W Stereo Amplifier header (Left+Right) 1 25-pin Parallel Header 1 6-pin PS/2 Mouse/Keyboard Header 1 4-pin Fan Header 1 4-pin SATA Power Output (Male) 1 4-pin +12V Alternate Power Connector
Power Supply for IMB-1900
External Power Supply – the board can be powered with a +12V external power supply though a locking DC connector on the back panel. The rear +12V DC jack accepts locking plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal ATX12V 2 x 2 power connector.
Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2 x 2 power connector is to be used.
Market Segments Supported
√ Digital Security & Surveillance √ Industrial Automation/Control √ Medical √ Retail (POS/Kiosk/ATM) √ Networking/Storage Server/Mail Server/Print Server
Ordering Info
Part Number
Description
JIMB-1900-2L
Mini-ITX motherboard with Celeron J1900, 2 LANs, and 12 COMs
JIMB-1900-6C
Mini-ITX motherboard with Celeron J1900, 1 LAN, and 6 COMs
1. Prepare a MS-DOS bootable USB flash drive. 2. Download the zip file. 3. Unzip the file and copy to the USB flash drive. 4. Reboot the PC into MS-DOS mode and run *.bat in command prompt. 5. Wait in suspense until the update finished.
1. Prepare a MS-DOS bootable USB flash drive. 2. Download the zip file. 3. Unzip the file and copy to the USB flash drive. 4. Reboot the PC into MS-DOS mode and run *.bat in command prompt. 5. Wait in suspense until the update finished.
Revised History
[A02]. Withdrawn. [A01]. Initial BIOS.
· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. · Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.
Validate your login
Sign In
Create New Account