Jetway JNP891P-4125 Gemini Lake Pico-ITX Industrial Motherboard
Model #: JNP891P-4125Item #: XJNP891P-4125
x
Special Order
These items are not immediately available for pickup at our stores.
We can ship these products to our stores for free in-store pickup.
Items usually arrive at the store within 2 to 7 business days.
Share:
E-Mail To A Friend:Jetway JNP891P-4125 Gemini Lake Pico-ITX Industrial Motherboard
E-mail this product information to:
Add your own personal message:
Enter your email address:
Note: Your email address is used only to let the recipient know who sent the email and in case of transmission error. Neither your address nor the recipient's address will be used for any other purpose.
Your message has been successfully sent.
Please fill-up the form properly.
Jetway JNP891P-4125 Gemini Lake Pico-ITX Industrial Motherboard
Intel® Celeron J4125 Processor Quad Core 2.00 GHz - 2.70 GHz, 10W TDP * Ships with silver flat heatsink for direct attaching to surface
Memory
1 * 260-pin DDR4-2400 up to 8GB Total
Graphics
Intel HD Graphics 600, 250MHz - 750MHz
Audio
Realtek ALC888 HD Audio
LAN
1 x Realtek RTL8111H Gigabit LAN
Storage
1 x M.2 Slot (M-key, 2242 SATA only) 1 x SATA3 6Gb/s Connector
32GB eMMC 1 x M.2 Slot (M-key, 2242 SATA only) 1 x SATA3 6Gb/s Connector
Super IO
FINTEK F81804U
TPM
Intel fTPM 2.0 (PTT) Trusted Computing Firmware
Back Panel Connectors
1 RJ-45 ports (10/100/1000) 2 HDMI 2.0 (4096 x 2160 @ 60Hz) 1 Micro SIM Card Slot 2 USB 3.0 ports 1 12V DC-in jack
Onboard I/O Connectors
1 M.2 Slot (M-key, 2242 SATA only) 1 Full Size Mini PCI-E Slot 1 SATA3 6Gb/s Connector 1 USB Pin Header (2.0 mm pitch) for up to 2 additional USB 2.0 Ports 1 Serial Port Headers (2.0 mm pitch) (RS232) 1 40-pin eDP (4096 x 2304 @ 60Hz) 1 AT/ATX Mode Jumper 1 8-bit GPIO Header 1 4-pin SMBUS Header 1 9-pin HD Audio Header 1 9-pin Front Panel Connector 1 4-pin Power-out Connector for 2.5" HDD/SSD
Power Supply for NP891P
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance √ Digital Signage √ Gaming √ Industrial Automation/Control √ Medical √ Retail (POS/Kiosk/ATM) √ Networking/Storage Server/Mail Server/Print Server √ Thin Client √ HTPC
Environment
Operating Temperature : 0 ~ 50°C Storage Temperature : -20 ~ 85°C
Ordering Info
Part Number
Description
JNP891P-4125
Celeron J4125 Pico-ITX motherboard with heatsink
JNP891P32-4125
Celeron J4125 Pico-ITX motherboard with heatsink and 32G eMMC
1. Unzip the file and copy to the USB flash drive with FAT32 format. 2. Insert USB and press [F7] on boot to select "UEFI: Built-in EFI Shell" 3. Type "fs0:" to change path when you see Shell prompt. 4. Type "BAUAJA05" to auto update BIOS. 5. Power off the system after the update finished.
Revised History
[A04]. Support mini PCIe to M.2 Daughter Boards. [A03]. Support ALC888 Audio. [A02]. Update Microcode for INTEL SA-00233. [A01]. Initial BIOS.
· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. · Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.
Validate your login
Sign In
Create New Account